Product

CMS50F(FW)

CMS50F Professional Pulse Oximeter with SpO2, Pulse Rate Monitoring and Data Storage Function for Medical & Home Care.

Category:

Email:

WhatsApp:

产品描述

Introduction
CMS50F Pulse Oximeter adopts PhotoelectricOxyhemoglobin Inspection Technology integrated with Capacity Pulse Scanning& Recording Technology, which can be used to measure human oxygensaturation and pulse rate through finger. The device is suitable for use infamily, hospital, oxygen bar, community healthcare and physical care in sports,etc. (It can be used before or after exercise, but not recommended to useduring exercising).
Function
- Displayof SpO2 value.
- Displayof pulse rate and bar graph.
- Displayof pulse waveform.
- Low-voltageindication: the low power indication symbol appearswhen the voltage is too low to work.
- Adjustable screen brightness.
- PR sound indication.
- Sound prompt function:over-limit prompt of measured value, probe-off or finger-out prompt, low powerprompt.
- Data memory function.
- Thedata can be uploaded to the terminal equipment by wired mode.
- Clockfunction.
- Chargingfunction.
Performance
- SpO₂ measurement range: 0 % ~ 100 % (resolution:1 %)
- Accuracy: 70 % ~ 100 %, ± 2 %;
  0 %~69 %, unspecified
- PR measurement range: 30 bpm ~ 250 bpm (resolution: 1 bpm)
- Accuracy: ± 2 bpm or ± 2 %, whichever is greater
- Accuracy under low perfusion: low perfusion 0.4%, SpO2accuracy: ± 4 %;PR accuracy:± 2 bpm or ± 2 %,whichever is greater.
- Light interference: compared to the values measuredin normal condition and ambient light condition, the deviation is less than ± 1%.
- Power consumption: ≤ 100 mA
- Working voltage: DC 3.6 V ~ 4.2 V
- Battery: one 3.7 V rechargeable lithium battery
- Battery lifetime: ≥ 500 times (charge and discharge times)
- Safety class: internally powered equipment, type BF applied part
Accessories
- One SpO2 probe
- OneUSB data line
- One User Manual
- One power adapter (optional)
Physical characteristic
- Dimension: 61mm (L) × 56 mm (W) × 24 mm (H)
- Weight:about 60 g (including one lithium battery)
Optional configuration
- SpO2 probe
- Power adapter
Certification
- CE FDA
Technical document
👉 CMS50F Manual.doc